How To Measure A Window Glass

How to Measure

Delight follow the measuring guidelines outlined below to ensure your glass inserts fit correctly. These measurements are also required to make a request for price quotation. Note: please allow for a + / - i/16" cutting tolerance.

For standard square and rectangular openings:

• Remove whatsoever erstwhile putty and/or stops and carefully mensurate the width of the crude opening of the window, chiffonier or door where the cut-to-size drinking glass volition be placed
• Round down this measurement to the nearest sixteenth of an inch. For example...alter 12 11/32" to 12 five/16".
• At present measure the meridian of the rough opening.
• As before, round down this measurement to the nearest sixteenth of an inch
• Lastly, deduct an boosted 1/viii" from the width and from the height measurements of the rough opening in your window, cabinet or door. For example, if the rough opening measures 14" x 24" - you would order a glass insert that is 13 7/8" x 23 7/eight".

Important Note: Nosotros supply all cutting-to-size glass with foursquare corners unless otherwise instructed. Some window or door inserts may require rounded corners. Examine your window or door opening carefully to determine your requirement. Small "dime shape" corners price slightly extra and must be specified at fourth dimension of order. Larger rounded corners volition require templates and are quoted on a per projection basis.

For arch top and special shape cabinet openings:

• You will demand to create a template.
• Suggested tools and materials are: Pattern Vellum (drafter'southward tracing newspaper), a straight border, scissors or razor pocketknife, painter's tape or masking tape and a sharp pencil.
• Lay the frame or door face down on a apartment, even surface. Embrace the dorsum of the frame or door with the Design Vellum and secure with painter's record or masking tape in order to prevent the paper from moving during tracing.
• Advisedly rub the side of the pencil against all edges of the opening beingness sure to get accurate impressions of the corners and any curve(s).
• Remove the newspaper from the frame or door and connect the corners using your direct border and pencil. Write inside the template border lines - "top" and "bottom" and "front" and "back".
• Cut out the template and place in the opening(due south) to ensure accuracy. If more than one door is required, try the template in every opening to make sure it works for all.

Template cuts are custom orders and volition be priced on a per lodge basis. Please send us your requirements for a prompt quotation past clicking here.

Please call us at (800) 221-7379, Option 6 (nine:00 am - 5:00 pm EST) for additional aid.
We invite you lot to click here to begin your pick procedure. You can besides contact us through our online form. Nosotros are at your service.

Source: https://www.restorationglass.com/restoration-glass-measure.cfm

Posted by: fullerseethe79.blogspot.com

Share this post